Door Finger Protector® – Unchallenged for providing the best protection for any door
Door Finger Protector®️
There are two basic Door Finger Protector®️ hinge cavity products available to order direct:
Door Finger Protector® (HC) for conventional doors that are standard sizes.
Door Finger Protector® (HCL) This product is suitable for larger sized conventional doors.
Ordering for Non-Standard Doors
Door Finger Protectors® are unique because they can work on nearly every other door and frame types. Specifying a suitable solution for uPVC, bifold, Crittall, steel, glass, aluminium and non-standard pivot hinges requires on-site assessment by one of our team.
Gate Cap - Door Finger Protector®️
The Gate cap is one size and is designed to complement the Door Finger Protector®️ range by protecting fingers from the top of the hinge cavity on low level gates.
Door Finger Protector®️ – for standard & large doors
Most doors can be protected with a single Door Finger Protector®️ Hinge Cavity (HC/HCL) shield section; the unique (patented) modular design allows the shield section to be extended safely to fit any door size.
Open the door as far as it will go to measure the door thickness and determine the maximum opening angle.
If you have any doubts at all, or if you need a larger variation, please call us on 01708 855 777. It is highly likely we can effectively shield the largest door in the world!
Hinge Pin
The Hinge Pin side (HP) Finger Protector®️ is supplied in one size to fit all hinged doors with the exception of large parliament hinges. These however, can be shielded; call us for advice. Used in conjunction with Door Finger Protector®️ the risk of finger entrapment injuries on the hinged edge of doors is totally eliminated.
As with Door Finger Protector®️, all types of doors including timber, metal and PVCu – as well as doors which open to 180 degrees, can be fitted with the hinge pin device.
Slide Safe™
Sliding doors also present a danger of finger and hand injury. Safety Assured Slide Safe™ creates a safe gap between the door’s leading edge and the closing jam. Available in sizes depending on depth of door – SP45, SP50, SP55.
Slide Safe™ has been designed primarily for external two-panel in-line sliding door systems, either left-hand or right-hand opening.
Slide Safe™ is not intended for use with ’tilt and slide’ or ‘lift and slide’ door systems. For aluminium sliding door systems, use ‘SP45’.
For PVCu or timber sliding door systems, measure the overall width of the frame and specify ‘SP50’ for door frames 73-110mm wide and ‘SP55’ for frames 120-150mm wide.
I am satisfied that Finger Protector meets all the necessary criteria I look for when risk assessing these essential safety management aids.
Nick Balmforth MBE
“With knowledge of what’s available on the market, the quality of Door Finger Protector® meets what people expect of Tesco”
Tesco
We use the Finger Protector® throughout our garden centre and have been highly satisfied by the product and the service provided by Safety Assured Ltd. Customer and staff safety are a top priority for us and this product gives us the confidence that we are fulfilling that aim. Also, in a retail environment, aesthetics are also important and we have been delighted with the subtlety of this door safety device. We would be happy to recommend the Finger Protector®️.
Meadow Croft Garden Centre
We received a fantastic service from Safety Assured. We identified that we had a need for an increased number of door guards but were not completely sure which areas to focus on. Safety Assured offered to carry out a no obligation risk assessment on the whole building and from this we were able to build a planned schedule of works which commenced back in April. The fitting was seamless and professional and we look forward to working with Safety Assured in the future and would recommend them to other schools and businesses without hesitation
Winnersh Primary School
As a school we are always looking for a quality service and Safety Assured have not disappointed. Angela and engineer Paul have provided a seamless experience from initial survey to the final install. Nothing is too much trouble and they know the protection of occupants in a school environment is top priority. The prices were reasonable knowing that schools are always on a tight budget, and engineer Paul was more than happy to give a bit more of his time within the agreed price. We have used Safety Assured again this year to return and replace more defective guards and would fully recommend the company to anyone looking for door safety devices to be fitted in their school/workplace. Thank you Safety Assured.
Windrush Primary School
I am satisfied that Finger Protector meets all the necessary criteria I look for when risk assessing these essential safety management aids.
Nick Balmforth MBE
“With knowledge of what’s available on the market, the quality of Door Finger Protector® meets what people expect of Tesco”
